What is a Commercial Lift Station?

A commercial lift station is a type of wastewater treatment plant designed to provide primary treatment for high-volume wastewater flows from commercial and industrial sources. Wastewater from these sources can often include large amounts of suspended solids, fats, oils, grease (FOG), and organic matter. Commercial lift stations are typically equipped with either gravity-flow or pumping systems that move the wastewater to the plant for treatment. The plant then separates the solid materials and discharges the treated wastewater into the sewer system. Lift stations come in various sizes and configurations, depending on the specific application. However, some common features include the following:

  • A wet well, where wastewater or other liquids are collected before being pumped out.
  • A dry well, where the pump(s) is/are located.
  • A control panel, where operators can monitor the system and make adjustments as needed.
  • A discharge pipe, through which the liquids are pumped out of the lift station. This may be a simple pipe that leads to the next treatment process or storage tank or a more complex system of pipes and valves that routes the liquids to multiple destinations.

The size and complexity of a lift station will vary depending on the specific application. In general, lift stations are designed to be simple and reliable, with as few moving parts as possible to minimize maintenance requirements.

Applications of Commercial Lift Stations

There are a variety of applications for commercial lift stations. Some common examples include the following:

  • Wastewater treatment plants: Wastewater treatment plants use lift stations to pump wastewater away from the plant and up to a higher elevation so that it can be processed and released back into the environment. Without lift stations, the wastewater would have to be released back into the environment at a much lower elevation, which could cause serious environmental damage.
  • Stormwater drainage: Lift stations can be very helpful in managing stormwater runoff. When it rains or floods, lift stations can help to prevent overflow by redirecting water to a safe location. This can help to minimize property damage and keep people safe during severe weather events.
  • Flood Control: The most common use for commercial lift stations is for flood control. By pumping water out of an area prone to flooding, the risk of flooding can be significantly reduced. This is especially important in areas where severe weather conditions are expected.
  • Water distribution: Commercial lift stations are an important part of water distribution systems. They are used to move water from one location to another, often to a higher elevation. This can be done through a pipeline or hose system. There are many different commercial lift stations, each with its unique set of benefits. For example, some lift stations are designed for use in sensitive environments near schools or hospitals. As a result, these units must meet stringent safety requirements. Other lift stations may be designed for use in corrosive environments, such as those near salt water or chemical plants. In these cases, the lift station must be made of materials that can resist corrosion.
  • Industrial Process: Commercial lift stations are an important part of many industrial processes, as they help to move wastewater and other liquid waste away from a facility. Using a commercial lift station, factories, processing plants, and other industrial facilities can keep their property clean and free of unwanted liquids. Additionally, using a commercial lift station can help to protect the environment by preventing wastewater from entering local waterways.
industrial pump repair


We exist to provide lasting solutions.

To perform with trustworthy and reliable pumps, parts, and service.

Our Process: Catalog, Diagnose, Estimate

Here at Industrial Pump Solutions, we offer a wide range of commercial lift station pump repair services. We have a team of highly trained, licensed, and experienced technicians who are familiar with all makes and models of lift station pumps. We offer repairs for all commercial lift station pumps, including submersible, centrifugal, and rotary lobe pumps. Some common symptoms that may indicate a need for commercial lift station pump repair include leaking from the pump or its seals, noisy operation, reduced flow rate, or a loss of power. If you notice any of these issues with your lift station pump, it’s important to have it repaired as soon as possible to avoid further damage. Our catalog includes everything from preventative maintenance and repairs to complete system replacements. We also offer a wide variety of parts and accessories, so you can be sure you’re getting the best possible products for your repair or replacement project.

At Industrial Pump Solutions, our Commercial Lift Station Pump Repair will include the following:

  • Remove and replace a faulty pump
  • Test equipment for proper function
  • Clean and flush lift station

Once the Commercial Lift Station Pump Repair is complete, the equipment will be thoroughly tested and flushed for proper function. Commercial Lift Station Pump Repair estimate may vary depending on the size and type of lift station, as well as the extent of the damage. However, a Commercial Lift Station Pump Repair estimate will generally include labor and materials costs. Labor costs will also depend on the work required to complete the repair. For example, if the pump needs to be replaced, installation labor costs will be higher than if only a part needs to be replaced. Materials costs will also vary depending on what is included in the repair. Many times, parts and supplies must be ordered from a distributor, which can result in higher prices. However, some repairs can be completed using parts already on hand.

Call Today

Calling in a professional for Commercial Lift Station Pump Repair is the best way to ensure the repair is done correctly and efficiently. Commercial lift stations are often used in high-traffic areas or businesses, so it’s important to have a repair technician who knows what they’re doing and can get the station up and running as quickly as possible. Industrial Pump Solutions is the most reputable and reliable company for Commercial Lift Station Pump Repair. We have a team of experienced and skilled professionals who can handle any Commercial Lift Station Pump Repair. Our professionals will be able to assess the damage and determine the best course of action for repairing the pump. We will also have access to parts and equipment that may not be readily available to someone without specialized training. Plus, we offer our services at the most competitive rates in the market.

Our team also boasts a state-of-the-art infrastructure that enables us to provide our clients with best-in-class Commercial Lift Station Pump Repair services. We use the latest technology and equipment for repairing complicated systems like these. Our team is dedicated to providing excellent customer service and meeting our clients’ requirements. So, if you are looking for a reliable company for Commercial Lift Station Pump Repair, choose us without hesitation!

Great Benefits from IPS.

  • Unmatched customer service

  • Our reputation speaks for itself

  • We have the infrastructure to handle all jobs

  • Free estimates on all jobs

  • Licensed & Trusted

  • We are affordable

  • Experienced & Professional

  • Unrivaled technology

  • Solutions Driven

  • We prioritize and adapt to your business

Pump Systems Maintenance
Pump Systems Service

Need a customized solution?

We have an experienced expert staff dedicated to the design and installations of the most efficient and serviceable pumps in the industry. We are trained to help you select the proper pumps and components for your specific application. For solutions with maintaining your equipment for maximum performance, IPS is ready and able to provide service and fast parts supply.

Trusted by the Names You Know.